PP Corrugated Sheet Machine | PP Hollow Sheet Extrusion Line

DATE:2026-11-16 09:12:26 / READ: / SOURCE:This station

Brand: HanDern Machinery (Wuhan) Also known as PP hollow grid board production line, for manufacturing PP corrugated sheets / calcium-plastic hollow sheets.

Complete Production Flow

Extruder + Melt Pump + Die Head → Vacuum Calibration & Cooling Table → Extended Cooling Support Rack → Main Haul-off Unit → Film Lamination Unit → Cross Cutting Machine → Finished PP Hollow Sheets

Extruder & Hollow Sheet Calibration Die Head

Extruder & Hollow Sheet Calibration Die Head

The extrusion die head and calibration unit serve as the core forming part of the PP Corrugated Sheet Machine. PP raw materials (can be filled with bamboo powder, talcum powder, phosphogypsum and other fillers) are melted in the extruder, then pumped into this special hollow sheet die head to extrude sheet blanks with hollow ribs. A large number of stainless steel corrugated hoses are water / oil temperature pipelines to precisely control die temperature and ensure stable sheet forming.

Close-up of Die Head & Melt Pump

Close-up of Die Head & Melt Pump

Close view of melt pump and hollow sheet mould for the PP Corrugated Sheet Machine.

  • Melt pump (grey square component on the left): Precisely measures melt flow, stabilizes extrusion pressure, guarantees consistent sheet thickness and reduces thickness deviation.
  • Large die head on the right: Distributes molten plastic and forms top & bottom panels together with middle reinforcing ribs in one pass to create the hollow grid structure. Various pipelines are for heating, cooling, vacuum extraction and venting. It is the heart of the whole PP Corrugated Sheet Machine.

Panoramic View of Extended Cooling Support Rack & Lamination Unit

Panoramic View of Extended Cooling Support Rack & Lamination Unit

The long white platform is the extended cooling conveyor rack. It extends the cooling path to fully dissipate heat from hot extruded sheets, minimizing sheet warpage and internal stress. The grey covered machine on the right is the online film laminator, which applies protective film on sheet surfaces to avoid scratches during transportation and cutting.

Main Haul-off Unit (HanDern Machinery)

Main Haul-off Unit (HanDern Machinery)

Main haul-off station marked with HanDern brand logo for the PP Corrugated Sheet Machine. Function: Pull cooled and calibrated PP hollow sheets forward at constant speed, stabilize sheet tension and control line speed. It synchronizes speed with the main extruder to prevent sheet thinning and width fluctuation caused by stretching. Multiple groups of pneumatic pressing rollers on the top clamp the upper and lower sheet surfaces to avoid slipping. The film lamination station is connected on its left side.


Side View of Main Haul-off Unit (Sheet Running View)

Side View of Main Haul-off Unit (Sheet Running View)

Side view of the haul-off station of the PP Corrugated Sheet Machine, with PP hollow sheet running smoothly. Staff are recording machine trial run and sheet samples. The yellow cabinet houses the drive system and electric control box. Anchor bolts at the bottom level the equipment for stable sheet conveying.


Fixed-Length Cross Cutting Machine (Cutting Unit)

Fixed-Length Cross Cutting Machine (Cutting Unit)

This is the final cutting host of the PP Corrugated Sheet Machine. Continuously conveyed sheets are cross-cut automatically to preset lengths to meet customers’ custom sheet sizes. The worker picks up freshly cut black PP hollow sheet samples to inspect surface finish and flatness. The yellow cabinet is the electric control box. Blue wrapped components on top are cutting cylinders, and blue air hoses are pneumatic lines.

Trial Run Finished Product — Black PP Hollow Sheet

Trial Run Finished Product — Black PP Hollow Sheet

Stack of cut finished sheets from the PP Corrugated Sheet Machine. Matte black surface with inner hollow grid ribs, also called PP corrugated plastic sheet. This black variant is mostly anti-static hollow sheet, widely adopted for electronic packaging and PCB separator boards. It can be fabricated into turnover boxes, divider sheets and advertising panels.

Machine Features

✅ Twin-screw extrusion for stable plasticization and lower energy consumption
✅ Vacuum calibration delivers flat sheet surface and uniform hollow structure
✅ Support online film lamination, capable of producing anti-static PP corrugated sheets
✅ Modular segmented assembly for easy installation and commissioning

Product Applications

The PP Corrugated Sheet Machine produces PP hollow sheets (corrugated plastic sheets), including standard, anti-static and conductive grades. End products are widely used in industrial turnover boxes, electronic packaging dividers, advertising backboards, construction partition panels and logistics packaging. It replaces paper cartons and is fully recyclable. Raw material options: neat PP, or modified PP filled with bamboo powder and phosphogypsum.

Author:admin


Phone now 8618627187890 OR More contact information →

Go To Top