What work should be done before the operation of hollow board production machinery
日期：2023/11/13 14:52:58 / 阅读： / 来源：本站
PP plastic hollow board machinery is a complete production line composed of multiple units, and any leakage in any link can cause problems in the operation of the entire production line. Therefore, the preparation work before the hollow board machinery starts running is particularly important. So what specific preparations should be done before starting and running the PP plastic hollow board machinery?
Before testing, it is necessary to conduct a comprehensive inspection and maintenance of the PP plastic hollow board equipment. Firstly, check whether the various components and connectors of the equipment are secure, and whether there is any looseness, wear, or damage. Secondly, inspect the lubrication system of the equipment to ensure that the lubricating oil at each lubrication point is sufficient and clean without contamination. In addition, inspect the electrical system of the equipment to ensure that the electrical connections are secure and that electrical components such as switches and buttons are normal and reliable. If any problems are found, they need to be repaired and replaced in a timely manner to ensure that the equipment can operate normally during testing.
2. Preparation of raw materials
Before conducting the trial machine, it is necessary to prepare the raw materials required for the production of PP plastic hollow boards. This includes PP plastic particles, reinforcing materials, etc. When preparing raw materials, it is necessary to ensure that the quality of the raw materials meets the requirements, without impurities or moisture. In addition, it is necessary to prepare sufficient raw materials for the testing machine to ensure the continuity and smooth progress of the testing process.
3. Mold and mold adjustment
Before testing, it is necessary to inspect and adjust the mold of the PP plastic hollow board equipment. Firstly, check the surface of the mold for flatness, wear, and damage. Secondly, it is necessary to adjust the mold according to production requirements and product specifications to ensure that the size and structure of the mold meet the requirements. In addition, it is necessary to inspect the heating system of the mold to ensure uniform and stable heating.
4. Cleaning and hygiene
Before testing, it is necessary to clean and sanitize the production workshop and equipment. A clean workshop can provide a good production environment and reduce the impact of impurities and pollution on product quality. In addition, equipment cleaning can ensure the normal operation of the equipment and the cleanliness of the production environment.
5. Safety measures
Before testing the machine, it is necessary to inspect and set up the safety facilities and measures in the production workshop. Ensure that safety doors, emergency stop buttons, safety protection devices, and other facilities are intact and reliable. In addition, it is necessary to provide safety training and guidance to operators to ensure that they can use the equipment correctly and strictly adhere to safety operating procedures.
6. Testing Plan and Records
Before testing, a detailed testing plan and records need to be developed. The test run plan includes the timing of the test run, the steps and processes of the test run, the objectives and requirements of the test run, etc. The testing records include various parameters, equipment operation, and product quality during the testing process. By analyzing the test machine records, problems can be identified in a timely manner and adjustments and improvements can be made to ensure the smooth progress of the test machine and achieve the expected results.