Machine brief introduction
This machine mainly for extrusion lamination roller non-woven fabric,thin paper surface
Main parameters of extrusion laminating machine production line:
Production structure: paper-plastic, non-woven film composite product such as paper cup, paper lunch box, self-adhesive sticker, centrifugal paper, main substrate/extruded layer;
1.Screw & barrel: screw diameter 90mm,L/D ratio:32:1,raw material:38CrMoAl,hardening and tempering,surface with nitrogen treatment,have special mixing, mixing effect good, has large extrusion capacity.
2.T type elastic mold: new thin edge mold,raw material:5CrNiMoV with hardening and tempering,chrome-plate,has good toughness and hardness,its Non-deformation when frequent use at high temperature.(Made by Handern)
3.Extruder reducer use better tightness reliability high strength hardness tooth surface reduce
4.Digital intelligent  temperature control system
5.Application substrate:20-100gsm paper roll,non-woven fabric, chemical fiber fabric,etc.
6.Casting film material:Extrusion lamination grade PP,PE,LDPE,LLDPE,HDPE,EVA,EAA,EMA,etc.
7.Casting film effective width:1000～2400mm
8.Casting film thickness:0.012～0.030mm (single layer)
9. Casting film uniformity:error ±8%
10.Peel strength:3～5N/30mm(depend on the laminated basic material)
11.Extrusion capacity max.:280kg/h
12.Design mechanical speed:0～260m/min
13. Double station unwinding, magnetic powder tension, unwinding (max) diameter 600mm;
14. Winding adopts winding method, automatic winding metering, winding (max) diameter 600mm;
15. Inflatable shaft winding and unwinding, discharge shaft: 3 inches (φ73mm);
16. Total installed capacity: about 150kw;
17. Composite laminating machine dimensions (length × width × height): 8500mm × 8800mm × 3200mm;
18. Laminating machine unit total weight: about 16000kg
The above compound laminating machine parameters are available for reference and also can be customized;