Anti-stick paper

Anti-stick paper

  • 27/12/2018 09:12:34

The last layer of paper on the laminate is anti-stick paper. Usually, this is a parchment or greaseproof paper that has been treated with a release agent on one side. It is placed on the top surface of…

Read more

Core paper layer

Core paper layer

  • 26/12/2018 09:05:59

The lower layer of the resin impregnated paper is a core paper. Usually, the unbleached paper is impregnated with a phenol formaldehyde resin to a resin content of 20% to 30% (the amount of resin in th…

Read more

Decorative paper

Decorative paper

  • 25/12/2018 09:10:08

Aesthetics are a very important factor in the sale and commercial trading of decorative laminates. To this end, decorative paper has also received a lot of attention. Its manufacture is even more diffi…

Read more

Cover paper

Cover paper

  • 24/12/2018 09:06:32

Decorative laminates are subject to various interpretations (such as counters and table tops) from time to time, so there is also a layer of overlay paper on the pattern or decorative surface. In the l…

Read more
Polished anti-adhesive paper

Polished anti-adhesive paper

  • 21/12/2018 08:48:36

The secondary component is a polished release paper. Whenever the polishing plate requires a protective surface, it is necessary to use a polished release paper. They are either attached to the paper w…

Read more

Polished board

Polished board

  • 20/12/2018 09:07:19

There are many high-elastic papers that are considered to be ideal liner papers. However, such papers are generally found to be costly. The need for compensating for a slight pressure differential for …

Read more

Stacking of laminates

Stacking of laminates

  • 19/12/2018 04:02:40

The next step in the production process is to clamp each impregnated paper into a press with a release paper and texturing paper in an appropriate sequence. Attempts have been made to stack them mechan…

Read more

Cooling and dip machine winding

Cooling and dip machine winding

  • 18/12/2018 09:19:35

Sheet Cooling: At the end of the drying chamber, there must be some way to cool the sheet before the sheets are rolled into paper rolls or cut into flat sheets. However, it is necessary to prevent furt…

Read more

Hot News

Outdoor exposed laminate

Outdoor exposed laminate

The surface of ordinary melamine-formaldehyde resin used for veneers does not stand well when exposed to the atmosphere. Melamine begins to crack after a short exposure. The effect of light on such surfaces is to give the laminate a gray appearance. Initi

Fireproof or flame retardant laminate

Fireproof or flame retardant laminate

When plastic laminates are used in hospitals, airports, and other public buildings, fire protection regulations sometimes require laminates to be resistant or fire resistant.This usually means that they must pass the tests designed by the insurance compan

Special surface laminate

Special surface laminate

In order to achieve a certain aesthetic effect, there are many special surfaces that can be applied to the veneer. Wood chips, rattan and fabrics (such as burlap) have been used for this purpose. These materials are typically saturated with melamine-forma

Automated post forming machine

Automated post forming machine

In an automated post-forming machine, the plastic laminate is heated as it moves under a heat source, which is often a radiant heater. The surface is 156 C - 162 C. This temperature value can be changed by changing the heat source temperature, the dista

Post-forming improvement

Post-forming improvement

Many other methods have been suggested as a way to make better post-formed laminates. One of them is to spray a few chemicals on the dry impregnated paper to reduce hydrogen bonding E39,423 in the paper immediately prior to impregnation of the phenolic re

Tags