Similarities between HDPE and LDPE in performance

Similarities between HDPE and LDPE in performance:
1) low water absorption, may not be dried before molding.
2) polyethylene shear sensitive materials that affect the viscosity shear rate is more obvious.
3) large and clear direction shrinkage, warpage products easily.
4) Mount on polyethylene is a crystalline polymer. It directly affects the degree of crystallinity uniform product density distribution so.
Requirements of the mold cooling water are arranged as uniformly as possible, so that uniform density to ensure the accuracy of product size and shape.

  • 30/05/2016
  • Recently
Click here to view Previous or Next

Related News

Casting PA film and production technology

Casting PA film and production technology

  • 21/12/2017 09:33:12

Casting PA film and production technology 1. Casting PA film and its raw materials used: PA film has the advantages of high strength, good toughness, good transparency, good heat resistance and cold…

Read more

Cast film mechanical winding device

Cast film mechanical winding device

  • 19/12/2017 09:21:48

Cast film mechanical winding device Corona treatment device: cast film after corona treatment, can improve the surface tension of the film to improve the printing of the film and together with other…

Read more

Downstream production line auxiliaries

Downstream production line auxiliaries

  • 18/12/2017 09:42:18

Downstream production line auxiliaries Thickness measurement device: In the high-speed continuous production process, cast film thickness measurement must be non-contact automatic tracking. Most o…

Read more

Casting film production line in the cooling device

Casting film production line in the cooling device

  • 15/12/2017 10:03:16

Casting film production line in the cooling device Casting production line in the cooling device mainly by the rack, cooling roller, peel roller, refrigeration system and air knife, auxiliary device…

Read more

Hot News

Parison wall thickness uniformity control

Parison wall thickness uniformity control

Strictly speaking, parison wall thickness uniformity control is the key to blow molding technologyThe following four types of control are performed in the blow molding operation.1 mechanical control: some control of the machine itself, such as temperature

Blown film intake method

Blown film intake method

1.Air intake Hollow-blow air intake is available in many forms, usually using needle blowing, top blowing, and bottom blowingThree kinds of law. Regardless of the form used, the pressure of the compressed air should be sufficient to blow the parisonThe

Blow mold basic technical points

Blow mold basic technical points

Blow mold basic technical points (1) Parting surface: The parting surface is one of the basic elements of a blow molding mold. Parting surfaceThe position should be such that the container can be smoothly released from the mold. Most blow molds are des

The required structure of blown film

The required structure of blown film

The required structure of blown film Blow mold: “product forming mold” also known as “blow mold”, referred to as “blow mold”, its typical structureIllustration. The mold is mainly composed of two half molds. Due to the mold collar and the clips are…

Several kinds of machine head operation mode of extrusion blow molding

Several kinds of machine head operation mode of extrusion blow molding

Several kinds of machine head operation mode of extrusion blow molding Direct extrusion of the preform head, from the structural point of view, direct extrusion of the preform head can be divided into two categories:Center feed type and side feed type.

Tags