Sprinkler


In the late 1960s and early 1970s, the development and commercialization of sprinklers was achieved. The sprinklers fully saturate the waxes of the grooved and printed corrugated box blanks. As shown in Figure 179, the apparatus transports individual carton blanks (each blank is vertically aligned and separated from each other by a rack system) through a wax overflow formed by a weir or nozzle. Spray point. Excess molten wax from the top and leached sections is concentrated at the bottom of the unit and recycled. The entire system is closed in such a way that the incoming cardboard can be preheated with warm air, the billet is hot leached after waxing, and then the production of each line is cooled by cold air before packaging and ready for shipment. The system is slightly less.
The amount of wax absorbed is also 40% - 50% of the weight of the original board. However, the new type of sprinkler allows the operator to obtain more adjustment control than the impregnator, and if desired, he can control the lower limit of the amount of wax used, as well as the flexibility to produce dry waxed or wet waxed articles. There was no statistically significant difference in the water resistance of the waxed carton between the products prepared by the dipping method or the spray method with the same amount of wax absorbed. The shower creates a better and more uniform surface. The individual cooling of the blank eliminates the stickiness of the adjacent blank.

  • 20/11/2018
  • Recently
Click here to view Previous or Next

Related News

Casting PA film and production technology

Casting PA film and production technology

  • 21/12/2017 09:33:12

Casting PA film and production technology 1. Casting PA film and its raw materials used: PA film has the advantages of high strength, good toughness, good transparency, good heat resistance and cold…

Read more

Cast film mechanical winding device

Cast film mechanical winding device

  • 19/12/2017 09:21:48

Cast film mechanical winding device Corona treatment device: cast film after corona treatment, can improve the surface tension of the film to improve the printing of the film and together with other…

Read more

Downstream production line auxiliaries

Downstream production line auxiliaries

  • 18/12/2017 09:42:18

Downstream production line auxiliaries Thickness measurement device: In the high-speed continuous production process, cast film thickness measurement must be non-contact automatic tracking. Most o…

Read more

Casting film production line in the cooling device

Casting film production line in the cooling device

  • 15/12/2017 10:03:16

Casting film production line in the cooling device Casting production line in the cooling device mainly by the rack, cooling roller, peel roller, refrigeration system and air knife, auxiliary device…

Read more

Hot News

Removal of excess resin

Removal of excess resin

There are two main methods for removing excess resin from the surface of the web: the doctor blade and the squeeze roller. The scraper can be as simple as a pair of angle irons arranged to contact the web. Usually they are mounted on a common rotatable su

Dipping machine

Dipping machine

Plastic laminates are manufactured industrially, and the web is impregnated in a machine called a dipper or a dipper. It includes a paper roll unwinding device, a resin tank, a facility for removing excess resin, a drying chamber for evaporating most of t

Saturated impregnation and infiltration process

Saturated impregnation and infiltration process

The analysis of the addition of the resin to the paper web in the plastic laminate is based on the assumption that the two processes that occur are simultaneous and sequential. First, the so-called saturated impregnation is the rapid absorption of the res

Laminate pore size distribution

Laminate pore size distribution

In the early 1960s, many laminates used the properties of this paper to estimate the amount of resin they absorbed. They used a thin resin solution to fill all the voids of the paper with the resin solution and scrape off the excess solution. As long as t

Laminate paper handling

Laminate paper handling

The resin and the cellulose fibers are thoroughly mixed to obtain a laminate, and the web is usually immersed in a resin solution. The surface tension causes the web to absorb the resin solution and fill the porous structure of the entire paper. The exces

Tags