Special plastic product extrusion production technology

                   Special plastic product extrusion production technology

    Special plastic products mainly refer to the extrusion production of hollow blow molding products, plastic bars, foam plastic products and plastic nets. These products have a certain market, but the production technology is often quite special.
    Overview of Hollow Blow Molding Products: Hollow Blow Molding In the industrial production and daily life, we will encounter many hollow plastic products, such as large containers for storing acid and alkali, various plastic bottles, hot water bottle shells, children toys, kettles, etc. . Most of them are produced by hollow blow molding.
    In the hollow blow molding process, the semi-molten tube obtained by extrusion or injection molding is placed in a mold of a certain shape, and the tube is blown with compressed air to make it tightly fit on the wall of the mold cavity. After cooling and demoulding, a hollow product molding method is obtained. Hollow blow molding can be divided into four categories: extrusion blow molding, injection blow molding, stretch blow molding and multilayer blow molding. Plastics for hollow blow molding include: PE, PVC, PP, PS, thermoplastic polyester, PA, acetate, and polyacetal resins. Among them, PE is used most widely. Hollow blow molding materials should have the following characteristics.
    1 Resistant to environmental stress cracking. As a container, when in contact with a surfactant solution, it should have the ability to prevent cracking under stress. Generally, the material with a larger molecular weight is selected.
    2 air tightness. This means that oxygen, carbon dioxide, nitrogen, water vapor, and the like are prevented from flowing into and out of the container. _
    3 impact resistance. In order to protect the contents of the container, at a certain temperature, the product should have impact resistance that falls from a height of one meter without breaking. In addition, there are chemical resistance, antistatic properties, toughness, and extrusion resistance.

  • 11/05/2018
  • Recently
Click here to view Previous or Next

Related News

Casting PA film and production technology

Casting PA film and production technology

  • 21/12/2017 09:33:12

Casting PA film and production technology 1. Casting PA film and its raw materials used: PA film has the advantages of high strength, good toughness, good transparency, good heat resistance and cold…

Read more

Cast film mechanical winding device

Cast film mechanical winding device

  • 19/12/2017 09:21:48

Cast film mechanical winding device Corona treatment device: cast film after corona treatment, can improve the surface tension of the film to improve the printing of the film and together with other…

Read more

Downstream production line auxiliaries

Downstream production line auxiliaries

  • 18/12/2017 09:42:18

Downstream production line auxiliaries Thickness measurement device: In the high-speed continuous production process, cast film thickness measurement must be non-contact automatic tracking. Most o…

Read more

Casting film production line in the cooling device

Casting film production line in the cooling device

  • 15/12/2017 10:03:16

Casting film production line in the cooling device Casting production line in the cooling device mainly by the rack, cooling roller, peel roller, refrigeration system and air knife, auxiliary device…

Read more

Hot News

Parison wall thickness uniformity control

Parison wall thickness uniformity control

Strictly speaking, parison wall thickness uniformity control is the key to blow molding technologyThe following four types of control are performed in the blow molding operation.1 mechanical control: some control of the machine itself, such as temperature

Blown film intake method

Blown film intake method

1.Air intake Hollow-blow air intake is available in many forms, usually using needle blowing, top blowing, and bottom blowingThree kinds of law. Regardless of the form used, the pressure of the compressed air should be sufficient to blow the parisonThe

Blow mold basic technical points

Blow mold basic technical points

Blow mold basic technical points (1) Parting surface: The parting surface is one of the basic elements of a blow molding mold. Parting surfaceThe position should be such that the container can be smoothly released from the mold. Most blow molds are des

The required structure of blown film

The required structure of blown film

The required structure of blown film Blow mold: “product forming mold” also known as “blow mold”, referred to as “blow mold”, its typical structureIllustration. The mold is mainly composed of two half molds. Due to the mold collar and the clips are…

Several kinds of machine head operation mode of extrusion blow molding

Several kinds of machine head operation mode of extrusion blow molding

Several kinds of machine head operation mode of extrusion blow molding Direct extrusion of the preform head, from the structural point of view, direct extrusion of the preform head can be divided into two categories:Center feed type and side feed type.

Tags