Decorative plastic composite panel

                       Decorative plastic composite panel

    This kind of aluminum-plastic composite board is very different from the aluminum-plastic composite board mentioned in Chapter 8. Aluminum-plastic composite board (hereinafter referred to as aluminum-plastic composite board) is a plastic board used as a middle core layer, and is made of two or three layers of aluminum foil coated with various colored fluorocarbon resins after anodizing treatment on one or both sides. A new metal-plastic composite sheet. Aluminium-plastic panel with fire, noise, heat insulation, light weight, good impact properties, acid and alkali corrosion resistance, non-stick dust, weather resistance is very good, resistant to ultraviolet radiation, does not fade, easy maintenance, easy cleaning, can be bent, can Drills, nails, and cuts are very easy to glue, rivet, and weld. It is particularly suitable for each
The decor of the occasion.
    Aluminium composite panels are divided into single-sided and double-sided structures, and the double-sided composite structure is shown in the figure. Aluminum-plastic composite board can be divided into two kinds according to the middle layer raw materials: one is PE aluminum-plastic composite board, the other is PVC free low foam aluminum-plastic composite board, and the core layer can also use common PVC hard board or PVC surface crust Foam board. The aluminum plate is 0.2-0.5 mm, 3003H16; the adhesive agent is a polymer adhesive film (model GN-1) or a low-melting resin.
   Double-sided aluminum plastic composite board structure diagram: 1- plastic core layer; 2 an adhesive or anodized film; 3 an aluminum box piece; 4 a color fluorine resin coating; 5 - plastic protective film
   Aluminum-plastic composite board and production process are more complicated and divided into two steps. The first step: the extrusion production of plastic sheets and the anodized aluminum sheets are treated with various colored resins. Aluminum foil and plastic core composite bonding and paste protective film.

  • 09/05/2018
  • Recently
Click here to view Previous or Next

Related News

Casting PA film and production technology

Casting PA film and production technology

  • 21/12/2017 09:33:12

Casting PA film and production technology 1. Casting PA film and its raw materials used: PA film has the advantages of high strength, good toughness, good transparency, good heat resistance and cold…

Read more

Cast film mechanical winding device

Cast film mechanical winding device

  • 19/12/2017 09:21:48

Cast film mechanical winding device Corona treatment device: cast film after corona treatment, can improve the surface tension of the film to improve the printing of the film and together with other…

Read more

Downstream production line auxiliaries

Downstream production line auxiliaries

  • 18/12/2017 09:42:18

Downstream production line auxiliaries Thickness measurement device: In the high-speed continuous production process, cast film thickness measurement must be non-contact automatic tracking. Most o…

Read more

Casting film production line in the cooling device

Casting film production line in the cooling device

  • 15/12/2017 10:03:16

Casting film production line in the cooling device Casting production line in the cooling device mainly by the rack, cooling roller, peel roller, refrigeration system and air knife, auxiliary device…

Read more

Hot News

Parison wall thickness uniformity control

Parison wall thickness uniformity control

Strictly speaking, parison wall thickness uniformity control is the key to blow molding technologyThe following four types of control are performed in the blow molding operation.1 mechanical control: some control of the machine itself, such as temperature

Blown film intake method

Blown film intake method

1.Air intake Hollow-blow air intake is available in many forms, usually using needle blowing, top blowing, and bottom blowingThree kinds of law. Regardless of the form used, the pressure of the compressed air should be sufficient to blow the parisonThe

Blow mold basic technical points

Blow mold basic technical points

Blow mold basic technical points (1) Parting surface: The parting surface is one of the basic elements of a blow molding mold. Parting surfaceThe position should be such that the container can be smoothly released from the mold. Most blow molds are des

The required structure of blown film

The required structure of blown film

The required structure of blown film Blow mold: “product forming mold” also known as “blow mold”, referred to as “blow mold”, its typical structureIllustration. The mold is mainly composed of two half molds. Due to the mold collar and the clips are…

Several kinds of machine head operation mode of extrusion blow molding

Several kinds of machine head operation mode of extrusion blow molding

Several kinds of machine head operation mode of extrusion blow molding Direct extrusion of the preform head, from the structural point of view, direct extrusion of the preform head can be divided into two categories:Center feed type and side feed type.

Tags